Latest Firmware Releases

The Syvecs WMI controller is a compact but very powerful unit for controlling a complete Water Injection electronics system, safely and correctly.
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

Latest Firmware Releases

Post by Ryan.g »

This thread is for tracking the firmware builds of the WMI Unit. When a new release is available it will be added to the end of this thread.

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Any further Questions please E-mail support@syvecs.co.uk or speak to your nearest dealer
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.3 Firmware

Post by Ryan.g »

This is the first public release level

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.3 - www.syvecs.com/downloads/WMI_1-3-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.5 Firmware

Post by Ryan.g »

Version 1.5 contains the following updates

*Custom PWM Output 1 - Fully Renamable output with adjustable X and Y axis
*Custom PWM Output 2 - Fully Renamable output with adjustable X and Y axis
*Flow Limp Based on WmiFinalDuty


Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.5 - www.syvecs.com/downloads/WMI_1-5-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.6.2 Firmware

Post by Ryan.g »

Version 1.6 contains the following updates

*Bug Fix on Veh Speed conflict with OEM Can Frames
*Added Subura Impreza My2015+ CAN Support
*Added Suzuki CAN Support

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.6 - www.syvecs.com/downloads/WMI_1-6-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Firmware Releases

Post by Ryan.g »

Version 1.6.2 contains the following updates

*Added more OEM CAN Support
*HBR2A Monitoring BugFix

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.6.2 - www.syvecs.com/downloads/WMI_1-6-2.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.7

Post by Ryan.g »

Version 1.7.1 contains the following updates

*Added LCD Control Maps for future hardware
*Added support for new X4 Board
*LimpMode Duty Multiplier bugfix

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.7.1 - www.syvecs.com/downloads/WMI_1-7-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Firmware Releases

Post by Ryan.g »

Version 1.8.1 contains the following updates

*Motec M1 Series Support
*EcuMaster Support

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.8.1 - www.syvecs.com/downloads/WMI_1-8-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.10 Firmware

Post by Ryan.g »

Version 1.10.1 contains the following updates

* Generic CAN Receive Logic expanded which allows users to now set a ID, Endianness, Start bit, length, scaling, offset and signing.
* Added CAN support for Yamaha ECUs
* Added CAN support for LINKECUs
* Added CAN support for LandRover Defender 90 110

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.10.1 for HBR WMI - www.syvecs.com/downloads/WMI_1-10-1.enc

Image

Firmware Version 1.10.1 for X4 WMI - www.syvecs.com/downloads/X4WMI_1-10-1.enc

Image
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.10.2 Firmware

Post by Ryan.g »

Version 1.10.2 contains the following updates

* Aquamist Flow Sensor support on earlier HBR board

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.10.2 for HBR WMI - www.syvecs.com/downloads/WMI_1-10-2.enc

Image

Firmware Version 1.10.2 for X4 WMI - www.syvecs.com/downloads/X4WMI_1-10-2.enc

Image
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

1.10.3

Post by Ryan.g »

Version 1.10.3 contains the following updates

* BugFix for FuelDuty CAN Pickup

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.10.3 for HBR WMI - www.syvecs.com/downloads/WMI_1-10-3.enc

Image

Firmware Version 1.10.3 for X4 WMI - www.syvecs.com/downloads/X4WMI_1-10-3.enc

Image
Post Reply