Syvecs Forums

Hugh, we will be releasing soon a firmware update with calculated Torque and Power from throttle mass flow and fuel flow

Updating the TinyDash is done via a USB C cable on the back and using our Syvecs Updater Program -https://www.syvecs.com/downloads/Syvecs_Updater.pdf Any further Questions please E-mail support@syvecs.co.uk or speak to your nearest dealer Release 1.17.1 ---- https://www.syvecs.com/downloads/TinyDash...

Latest Base Calibration for the TinyDash found attached.

Use our Scal Software to connect live to the TinyDash and Edit the calibration - https://www.syvecs.co.uk/forum/viewtopi ... a0862148f7

Updating the TinyDash is done via a USB C cable on the back and using our Syvecs Updater Program -https://www.syvecs.com/downloads/Syvecs_Updater.pdf Any further Questions please E-mail support@syvecs.co.uk or speak to your nearest dealer Release 1.15.1 ---- https://www.syvecs.com/downloads/TinyDash...

The latest Syvecs DI12 Base map which matches the 1.1 firmware can be found below in Attachments

Firmware 1.1 of the Syvecs DI12 Module is attached below. Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf This Firmware is only for DI12 Modules which has the USB plug on the back of the Unit with removable HEX Plug The 1.1 Fi...

Latest Firmware Releases for the Syvecs DI12 which have the USB Adjustment port as seen below

Please Can you Email Support@Syvecs.com and not post in this area

1.13 Default CAL

Version 1.13.2 contains the following updates * Added Canam / Seadoo CAN Support * Added Ford Mustang F150 / Mustang CAN Support * Allow WMI Solenoid to be run lower than 25%, Now 10hz is allowed * BugFix with WMISelect from CAN Please ensure you are using the Latest Ssuite software which has USB su...