Latest Firmware Releases

Technical Help / Firmwares for the Audi R8 Gen2 and Lamborghini Huracan Awd Controllers
Slowv10
Posts: 1
Joined: Tue Nov 29, 2022 3:58 am

Re: Latest Firmware Releases

Post by Slowv10 »

Hello, I have a huracan 610-4 and am trying to develop a good calibration so I can launch with low 60 foot numbers and not spin . Is there a calibration that you guys have put together that I can work off of ? I am new to exotic tuning and am quite lost on how to calibrate with scal. What should I be changing to get nice solid launches on street tires ? I recently changed my tire size from 305/30/20 to 345/30/20 and I believe the calibrator is confused with that and leaves the car extremely wobbly on top end . If you can send a video or instructions that would be great. Also, can I just save a file that allows me to dyno my car on a rwd roller or do I have to change it every time ? Any info will be greatly appreciated as I am eager to learn how to dial this controller in.
Ryan.g
Syvecs Staff - Caretaker
Posts: 560
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

Changes since 1.24.4:

*Added Vbat monitoring support on X4AWD modules
* Changes Item AwdOutputAmps to AwdOutputCurrent

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

OLD BOARD - Firmware Version 1.25.1 - www.syvecs.com/downloads/AWD_HuracanR8_1-25-1.enc
NEW BOARD - Firmware Version 1.25.1 - www.syvecs.com/downloads/X4AWD_HuracanR8_1-25-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 560
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Firmware Releases

Post by Ryan.g »

Changes since 1.25.1:

* MQB4 DriveMode (CalSelect Edit)
* Added LatG Duty Adjustment
* AWD Pressure can be wired in and read 0-5v on R35, 997, Yaris, RS3, MQB, Corolla.... Huracan and 991 have pressure sensor as standard
* Added support for 997 AWD to be fitted in 996. (Picks up and read the 996 CAN) CarCode = 3

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.


OLD BOARD - Firmware Version 1.27.1 - www.syvecs.com/downloads/AWD_HuracanR8_1-27-1.enc
NEW BOARD - Firmware Version 1.27.1 - www.syvecs.com/downloads/X4AWD_HuracanR8_1-27-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 560
Joined: Fri May 30, 2008 4:05 pm

1.29 Firmware Release

Post by Ryan.g »

Changes since 1.27.1:

* Usb Datalogging
* Only Awd Pressure is read from Hall input if Huracan or 991 AWD build
* Programming fix

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

OLD BOARD - Firmware Version 1.29.1 - https://www.syvecs.com/downloads/AWD_Hu ... 1-29-1.enc
NEW BOARD - Firmware Version 1.29.1 - https://www.syvecs.com/downloads/X4AWD_ ... 1-29-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 560
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Firmware Releases

Post by Ryan.g »

Changes since 1.29.1:

* Added AWDTemp Transmission to Gateway
* Enable Speed for Centre Slip Maps

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

OLD BOARD - Firmware Version 1.31.1 - https://www.syvecs.com/downloads/AWD_Hu ... 1-31-1.enc
NEW BOARD - Firmware Version 1.31.1 - https://www.syvecs.com/downloads/X4AWD_ ... 1-31-1.enc
Locked