Latest Base Maps

Technical Help / Firmwares for the Yaris GR Awd Controllers
Locked
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

Latest Base Maps

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_YarisGR 1.21.SC
(46.26 KiB) Downloaded 3367 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_YarisGR 1.23.SC
(51.46 KiB) Downloaded 3151 times
AwdBase_YarisGR 1.23 X4.SC
(51.46 KiB) Downloaded 3270 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_YarisGR 1.24.SC
(55.83 KiB) Downloaded 3208 times
AwdBase_YarisGR 1.24 X4.SC
(55.78 KiB) Downloaded 3384 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_YarisGR 1.25 X4.SC
(61.05 KiB) Downloaded 3590 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_YarisGR 1.27.SC
(66.84 KiB) Downloaded 1644 times
AwdBase_YarisGR 1.27 X4.SC
(66.87 KiB) Downloaded 1673 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

For use with 1.27 Firmwares
Attachments
AwdBase_YarisGR 1.28 X4.SC
(72.44 KiB) Downloaded 1055 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

1.29 Base map
Attachments
AwdBase_YarisGR 1.29 X4.SC
(72.89 KiB) Downloaded 1127 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 582
Joined: Fri May 30, 2008 4:05 pm

1.34 Base map

Post by Ryan.g »

Base maps for Gen1 and Gen2 Yaris AWD 1.34 firmware
Attachments
AwdBase_YarisGR 1.34 X4.SC
(31.31 KiB) Downloaded 261 times
AwdBase_Yaris24 1.34 X4.SC
(31.31 KiB) Downloaded 278 times
Locked