Latest Base Maps
Latest Base Maps
For use with 1.21 Firmware
- Attachments
-
- AwdBase_YarisGR 1.21.SC
- (46.26 KiB) Downloaded 4010 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_YarisGR 1.23.SC
- (51.46 KiB) Downloaded 3786 times
-
- AwdBase_YarisGR 1.23 X4.SC
- (51.46 KiB) Downloaded 3911 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_YarisGR 1.24.SC
- (55.83 KiB) Downloaded 3824 times
-
- AwdBase_YarisGR 1.24 X4.SC
- (55.78 KiB) Downloaded 4026 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_YarisGR 1.25 X4.SC
- (61.05 KiB) Downloaded 4241 times
Re: Latest Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_YarisGR 1.27.SC
- (66.84 KiB) Downloaded 2249 times
-
- AwdBase_YarisGR 1.27 X4.SC
- (66.87 KiB) Downloaded 2279 times
Re: Latest Base Maps
For use with 1.28 Firmwares
- Attachments
-
- AwdBase_YarisGR 1.28 X4.SC
- (72.44 KiB) Downloaded 1633 times
Re: Latest Base Maps
1.29 Base map
- Attachments
-
- AwdBase_YarisGR 1.29.SC
- (72.98 KiB) Downloaded 278 times
-
- AwdBase_YarisGR 1.29 X4.SC
- (72.89 KiB) Downloaded 1762 times
1.34 Base map
Base maps for Gen1 and Gen2 Yaris AWD 1.34 firmware
- Attachments
-
- AwdBase_YarisGR 1.34 X4.SC
- (31.31 KiB) Downloaded 906 times
-
- AwdBase_Yaris24 1.34 X4.SC
- (31.31 KiB) Downloaded 897 times