Latest Base Map

Technical Help / Firmwares for the Infiniti Q60 Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Latest Base Map

Post by Ryan.g »

The latest Infiniti AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Attachments
AwdBase_QX60 1.15.SC
(38.8 KiB) Downloaded 2645 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.18

Post by Ryan.g »

1.18 Base map, must be used with 1.18 Firmware
Attachments
AwdBase_QX60 1.18.SC
(42.89 KiB) Downloaded 2629 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.21 Base Map

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_QX60 1.21.SC
(46.26 KiB) Downloaded 2601 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_QX60 1.23 X4.SC
(51.46 KiB) Downloaded 2575 times
AwdBase_QX60 1.23.SC
(51.46 KiB) Downloaded 2581 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_QX60 1.24 X4.SC
(55.78 KiB) Downloaded 2560 times
AwdBase_QX60 1.24.SC
(55.83 KiB) Downloaded 2462 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_QX60 1.25 X4.SC
(61.05 KiB) Downloaded 2493 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_QX60 1.27 X4.SC
(66.87 KiB) Downloaded 585 times
AwdBase_QX60 1.27.SC
(66.84 KiB) Downloaded 653 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.28 Firmware
Attachments
AwdBase_QX60 1.28 X4.SC
(72.44 KiB) Downloaded 200 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

1.29 base map
Attachments
AwdBase_QX60 1.29 X4.SC
(72.89 KiB) Downloaded 210 times
Post Reply