Latest Base Map

Technical Help / Firmwares for the Audi R8 Gen2 and Lamborghini Huracan Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Latest Base Map

Post by Ryan.g »

The latest Huracan/R8 AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Attachments
AwdBase_HuracanR8 1.14.SC
(37.21 KiB) Downloaded 1107 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

1.15 Firmware Base Map
Attachments
AwdBase_HuracanR8 1.15.SC
(41.62 KiB) Downloaded 1046 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.18

Post by Ryan.g »

1.18 Base map, must be used with 1.18 Firmware
Attachments
AwdBase_HuracanR8 1.18.SC
(42.89 KiB) Downloaded 994 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.21 Base Map

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_HuracanR8 1.21.SC
(48.05 KiB) Downloaded 997 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_HuracanR8 1.23 X4.SC
(51.46 KiB) Downloaded 940 times
AwdBase_HuracanR8 1.23.SC
(51.46 KiB) Downloaded 979 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_HuracanR8 1.24 X4.SC
(55.78 KiB) Downloaded 954 times
AwdBase_HuracanR8 1.24.SC
(55.83 KiB) Downloaded 935 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_HuracanR8 1.25 X4.SC
(61.05 KiB) Downloaded 895 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_HuracanR8 1.27 X4.SC
(66.87 KiB) Downloaded 501 times
AwdBase_HuracanR8 1.27.SC
(66.84 KiB) Downloaded 468 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.28 Firmwares
Attachments
AwdBase_HuracanR8 1.28 X4.SC
(72.44 KiB) Downloaded 144 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

1.29 base map
Attachments
AwdBase_HuracanR8 1.29 X4.SC
(72.89 KiB) Downloaded 199 times
Post Reply