Latest Base Map

Technical Help / Firmwares for the VAG MQB Range - Audi RS3 / TTRS
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Latest Base Map

Post by Ryan.g »

The latest VAG MQB AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.

This base map limits the Max duty to 70%, Some users of the Rs3 Kit from Iroz motorsport have the duty limits at 80% or even 90%. You will need to adjust in Scal to Suit
Attachments
AwdBase_RS3 1.14.SC
(37.21 KiB) Downloaded 2774 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.15

Post by Ryan.g »

1.15 Firmware Base Map
Attachments
AwdBase_RS3 1.15.SC
(38.8 KiB) Downloaded 2590 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.18

Post by Ryan.g »

1.18 Base map, must be used with 1.18 Firmware
Attachments
AwdBase_RS3 1.18.SC
(42.89 KiB) Downloaded 2466 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.21 Base Map

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_RS3 1.21.SC
(46.26 KiB) Downloaded 2573 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_RS3 1.23.SC
(51.46 KiB) Downloaded 2448 times
AwdBase_RS3 1.23 X4.SC
(51.46 KiB) Downloaded 2459 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_RS3 1.24.SC
(55.83 KiB) Downloaded 2373 times
AwdBase_RS3 1.24 X4.SC
(55.78 KiB) Downloaded 2472 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_RS3 1.25 X4.SC
(61.05 KiB) Downloaded 2448 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_RS3 1.27.SC
(66.84 KiB) Downloaded 601 times
AwdBase_RS3 1.27 X4.SC
(66.87 KiB) Downloaded 611 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.28 Firmwares
Attachments
AwdBase_RS3 1.28 X4.SC
(72.44 KiB) Downloaded 228 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.29 Firmwares
Attachments
AwdBase_RS3 1.29 X4.SC
(72.89 KiB) Downloaded 234 times
Post Reply