EGT Calibration ?

[stevieturbo]

Should all K type probes be the same ?

I bought one of these to use, https://shop.vems.hu/catalog/sensor-type-p-53.html

But the only EGT in the Sensor DB lists a Texense 1250degC unit

This seems quite off with this probe, readings also seem erratic. Ambient sits at around 70degC

When running temperatures are sky high, over and above anything sensible

[pat]

EGT linearisations are normally for non standard responses, a flatline 0 everywhere in the linearisation table is used to signify a standard sensor.