Page 1 of 1

Latest Firmware Releases

Posted: Mon Aug 22, 2022 6:31 am
by Ryan.g
Firmware 1.4 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.4 Firmware fixes the following issues:

* Added support for 100hz new hardware
* Signed issue fixed on heading
* Speed Jumping issue fixed when stationary at high altitudes

1.5 Firmware

Posted: Thu Feb 16, 2023 8:01 am
by Ryan.g
Firmware 1.5 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.5 Firmware fixes the following issues:

* BugFix for 100hz IMU Data being 90deg out with New IC

1.6 Firmware

Posted: Sun Feb 25, 2024 3:25 pm
by Ryan.g
Firmware 1.6 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.6 Firmware fixes the following issues:

* Improvements for signal decoding in areas where sat data is limited