Latest Firmware Releases

The Syvecs WMI controller is a compact but very powerful unit for controlling a complete Water Injection electronics system, safely and correctly.
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 536
Joined: Fri May 30, 2008 4:05 pm

1.13 Firmware

Post by Ryan.g »

Version 1.13.2 contains the following updates

* Added Canam / Seadoo CAN Support
* Added Ford Mustang F150 / Mustang CAN Support
* Allow WMI Solenoid to be run lower than 25%, Now 10hz is allowed
* BugFix with WMISelect from CAN

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.13.3 for HBR WMI - http://www.syvecs.com/downloads/WMI_1-13-2.enc

Image

Firmware Version 1.13.3 for X4 WMI - http://www.syvecs.com/downloads/X4WMI_1-13-2.enc

Image
Top
Lqqk
Posts: 14
Joined: Thu Mar 19, 2020 3:40 pm

Re: Latest Firmware Releases

Post by Lqqk »

Aquamist FAV works with frequency of 10hz - thankyou.
Last edited by Lqqk on Mon Jul 03, 2023 5:12 pm, edited 1 time in total.
Top
Ryan.g
Syvecs Staff - Caretaker
Posts: 536
Joined: Fri May 30, 2008 4:05 pm

1.15 Firmware

Post by Ryan.g »

Version 1.15 contains the following updates

* Added USB Datalogging Support - https://youtu.be/bzvMUCqiv_0

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found here - http://www.syvecs.com/downloads/Syvecs_Updater.pdf

Firmware Version 1.15.1 for HBR WMI - http://www.syvecs.com/downloads/WMI_1-15-1.enc

Image

Firmware Version 1.15.1 for X4 WMI - http://www.syvecs.com/downloads/X4WMI_1-15-1.enc

Image
Top
Post Reply

Return to “Syvecs WMI Module”