Syvecs Forums

The little Hella SSR's don't handle much current, realistically about 10A is their max. I use one for the water injection which is only short duty though. I wouldn't use it for a fuel pump. Even in the first log though, Fuel pump status is simply ON ? and it still has the little dropouts ? So that ...

The advert for the controller seems to suggest the DW440 is a dual speed pump, not a PWM pump ? And it mentions 68% and 100% ? Is it just that you trying to use 30%, the pump or controller just isn't happy ? Or is it the C103 controller ? The instructions don't seem so clear, and which one do you a...

It's an S7 Plus. A better log is attached (has pump1duty).

Does anyone have any experience with this Deutschwerks DW440 fuel pump, configured for PWM control? We're experiencing a dip in fuel pressure (see attached log). We are controlling the PWM with output/pin A20 and have tried with and without a 1k ohm pullup resistor across 5v and the pwm signal. We'v...

I can help you with a dash config. I would need to know the contents of your datastream and depending on your goals with the Motec dash, I would most likely have some more questions for you. If you're interested, email me at jason@bendcalibration.com

When on the Syvecs Pro app and viewing the frame content wizard, it appears to limit us to twenty rows and four columns worth of content. I've also read that it if you have a Syvecs PnP kit, it is recommended to not edit the CAN frame content in SCal. However, there are some CAN data values I want t...

Following. Having the same issue. Any luck pairing?

Thanks for your help. I'll be figuring this out over the weekend, so we'll see how it goes.

Jason

Okay, so if I activate Pit Speed Limit maps and ALS maps with the same switch, this should work. Sound right?

Thanks, Stevie. I saw that post before I posted. Is everything explained in that post? I'm not understanding how to apply a separate rev limiter when ALS is active.