Syvecs Forums

Stevie, I can see why that screen shot is confusing, the voltage im showing you is the voltage when it thinks its in 5th. Yes the voltages are set exact and then i check the logs to ensure they are correct. Im going to play with the Delta and reduce it, i think that mean the targetV will be closer t...

Stevie, Sensor now set correctly and gear change is so much better, but now having an issue between 4th and 5th gear, it thinks its in 5th but isn't. in gear voltage.png You can see from this log there is a reduction in voltage toward target voltage but I'm guessing the targetV has been met thus ecu...

lol, on it

Position sensor is set accurate and always checked against the log voltage and its spot on. I replaced the gear sensor and still the same. ill increase the logging and see if anything shows up, i might look at the mechanical setup of the actuator too. Dont know it it matters but the gear voltages ar...

Hoping for a little help, been tuning the gearbox now for some time and its actually now really ok to drive. with smooth up and OK downshift but when doing pull and holding the foot to the floor and completing a flat shift occasionally it will not find the next gear. i am running closed loop and can...

Also now tested the output of the cartek when disconnected from the Syvecs, got a 12v all the time so defo something to do with the input into the Syvecs. Hopefully you can see something in the cal, don't know if its relevant but before the input was used for this is was assigned to the turbo speed ...

pull up is off, ill PM you the cal so you can check it over

nice solid LED on the internal button, very odd indeed.

ok, traced the an04 input, get a nice 4.9v showing on the input, when the car is then started it goes from 4.9v to 1.22v then jumps up and down repeatedly. i think im going to disconnect the input and monitor with a scope and see if the input is the issue.

i will log and see what is happening, just for future reference, how would you configure the inputs and outputs?, for example the H Bridges?