Latest Base Map

[Ryan.g]

The latest Infiniti AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.

[Ryan.g]

1.18 Base map, must be used with 1.18 Firmware

[Ryan.g]

For use with 1.21 Firmware

[Ryan.g]

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares

[Ryan.g]

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares

[Ryan.g]

For use with 1.25 firmware on X4AWD Units

[Ryan.g]

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares

[Ryan.g]

For use with 1.28 Firmware