Latest Base Map

Technical Help / Firmwares for the Nissan R35GTR Awd Controller
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

Latest Base Map

Post by Ryan.g »

The latest Nissan R35GTR AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
Attachments
AwdBase_GTR 1.14.SC
(37.21 KiB) Downloaded 2877 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.15

Post by Ryan.g »

1.15 Firmware Latest base map
Attachments
AwdBase_GTR 1.15.SC
(38.8 KiB) Downloaded 2821 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.18

Post by Ryan.g »

1.18 Base map, must be used with 1.18 Firmware
Attachments
AwdBase_GTR 1.18.SC
(42.89 KiB) Downloaded 2747 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.21 Base Map

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_GTR 1.21.SC
(46.26 KiB) Downloaded 2731 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_GTR 1.23.SC
(51.46 KiB) Downloaded 2674 times
AwdBase_GTR 1.23 X4.SC
(51.46 KiB) Downloaded 2659 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_GTR 1.24.SC
(55.83 KiB) Downloaded 2652 times
AwdBase_GTR 1.24 X4.SC
(55.78 KiB) Downloaded 2602 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_GTR 1.25 X4.SC
(61.05 KiB) Downloaded 2631 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_GTR 1.27.SC
(66.84 KiB) Downloaded 663 times
AwdBase_GTR 1.27 X4.SC
(66.87 KiB) Downloaded 654 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

For use with 1.28 Firmwares
Attachments
AwdBase_GTR 1.28 X4.SC
(72.44 KiB) Downloaded 305 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 559
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Map

Post by Ryan.g »

1.29 Base map
Attachments
AwdBase_GTR 1.29 X4.SC
(72.89 KiB) Downloaded 299 times
Post Reply