Pwm fuel injector

The Syvecs WMI controller is a compact but very powerful unit for controlling a complete Water Injection electronics system, safely and correctly.
Post Reply
Lqqk
Posts: 15
Joined: Thu Mar 19, 2020 3:40 pm

Pwm fuel injector

Post by Lqqk »

Is it possible to use a fuel injector (high impedance) with the Syvecs wmi? Have wondered based on the manual images?
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Pwm fuel injector

Post by Ryan.g »

yes no issue at all, i would say an injector is better than most valves on the market
darksyde
Posts: 7
Joined: Sat May 01, 2021 9:06 am

Re: Pwm fuel injector

Post by darksyde »

I want to use two injectors (one per bank on a six cylinder) with a F88.
Would it be possible to set up WMI as secondary injectors and assign the three cylinders of one bank to one injector output?
I would like to keep it syncronized to the crank, so the cylinders are getting an even distribution of wm.
RICE RACING
Posts: 456
Joined: Mon Feb 24, 2014 1:08 am

Re: Pwm fuel injector

Post by RICE RACING »

no
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
darksyde
Posts: 7
Joined: Sat May 01, 2021 9:06 am

Re: Pwm fuel injector

Post by darksyde »

So I am going to assign secondary injector outputs 1-6 to six outputs and wire three outputs for one bank together for the injector. Same for the other bank.

As they are open collector, can I just put the three outputs on one injector or should I use a diode in-line on each output of the ECU?
thomasfrank
Posts: 6
Joined: Wed Oct 25, 2023 10:15 am

Re: Pwm fuel injector

Post by thomasfrank »

Lqqk wrote: Sat May 11, 2024 9:18 am Is it possible to use a fuel injector (high impedance) with the Syvecs wmi? Have wondered based on the manual Wordle images?
Syvecs suggests the possibility of using a staged injection system with both high and low-impedance injectors, but there's no confirmation for WMI specifically.
lilycollins9x
Posts: 5
Joined: Wed Jul 12, 2023 2:37 am

Re: Pwm fuel injector

Post by lilycollins9x »

Yes, it is possible to use a high impedance fuel injector with the Syvecs Water Methanol Injection (WMI) system. The Syvecs WMI system is designed to work with injectors that are typically used for water methanol injection purposes, which are often high impedance injectors.

Monkey Mart
Post Reply