Latest Base Maps

Technical Help / Firmwares for the Yaris GR Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Latest Base Maps

Post by Ryan.g »

For use with 1.21 Firmware
Attachments
AwdBase_YarisGR 1.21.SC
(46.26 KiB) Downloaded 2461 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.23 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares
Attachments
AwdBase_YarisGR 1.23.SC
(51.46 KiB) Downloaded 2395 times
AwdBase_YarisGR 1.23 X4.SC
(51.46 KiB) Downloaded 2424 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.24 Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares
Attachments
AwdBase_YarisGR 1.24.SC
(55.83 KiB) Downloaded 2385 times
AwdBase_YarisGR 1.24 X4.SC
(55.78 KiB) Downloaded 2358 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

1.25

Post by Ryan.g »

For use with 1.25 firmware on X4AWD Units
Attachments
AwdBase_YarisGR 1.25 X4.SC
(61.05 KiB) Downloaded 2572 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares
Attachments
AwdBase_YarisGR 1.27.SC
(66.84 KiB) Downloaded 603 times
AwdBase_YarisGR 1.27 X4.SC
(66.87 KiB) Downloaded 666 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

For use with 1.27 Firmwares
Attachments
AwdBase_YarisGR 1.28 X4.SC
(72.44 KiB) Downloaded 176 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 549
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Base Maps

Post by Ryan.g »

1.29 Base map
Attachments
AwdBase_YarisGR 1.29 X4.SC
(72.89 KiB) Downloaded 208 times
Post Reply