Latest Firmware Releases

Technical Help / Firmwares for the Corolla GR Awd Controllers
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

Latest Firmware Releases

Post by Ryan.g »

Version 1.25 is the first release of the CorollaGR Firmware

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.

Firmware Version 1.25 - www.syvecs.com/downloads/X4AWD_Corolla_1-25-1.enc
Ryan.g
Syvecs Staff - Caretaker
Posts: 496
Joined: Fri May 30, 2008 4:05 pm

Re: Latest Firmware Releases

Post by Ryan.g »

Changes since 1.25.1:

* MQB4 DriveMode (CalSelect Edit)
* Added LatG Duty Adjustment
* AWD Pressure can be wired in and read 0-5v on R35, 997, Yaris, RS3, MQB, Corolla.... Huracan and 991 have pressure sensor as standard
* Added support for 997 AWD to be fitted in 996. (Picks up and read the 996 CAN) CarCode = 3

Please ensure you are using the Latest Ssuite software which has USB support - http://www.syvecs.com/forum/viewtopic.php?f=8&t=122

Help on updating the firmware can found in the via this YouTube Help video - https://www.youtube.com/watch?v=RuXkm_9gBRU

IMPORTANT: The AWD Firmware is locked to the AWD Hardware. While you will be able to flash the Enc file for a Huracan onto say a R35GTR unit, it will not come online as the hardware key will not match. Ensure you load the correct code.


Firmware Version 1.27 - www.syvecs.com/downloads/X4AWD_Corolla_1-27-1.enc
Post Reply