Latest Firmware Releases

100Hz GPS and IMU Module
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

Latest Firmware Releases

Post by Ryan.g »

Firmware 1.4 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.4 Firmware fixes the following issues:

* Added support for 100hz new hardware
* Signed issue fixed on heading
* Speed Jumping issue fixed when stationary at high altitudes
Last edited by Ryan.g on Sun Feb 25, 2024 3:26 pm, edited 1 time in total.
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

1.5 Firmware

Post by Ryan.g »

Firmware 1.5 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.5 Firmware fixes the following issues:

* BugFix for 100hz IMU Data being 90deg out with New IC
Attachments
SyvecsGPS100hz Lat Long Fix.zip
(18.24 KiB) Downloaded 1582 times
Ryan.g
Syvecs Staff - Caretaker
Posts: 498
Joined: Fri May 30, 2008 4:05 pm

1.6 Firmware

Post by Ryan.g »

Firmware 1.6 of the 50Hz/100Hz GPS Module is attached below.

Please use the Syvecs Updater program to load the ENC file. Guide here http://www.syvecs.com/downloads/Syvecs_Updater.pdf

ENSURE the GPS is sealed again if using in harsh environments with a silicon based sealant

The 1.6 Firmware fixes the following issues:

* Improvements for signal decoding in areas where sat data is limited
Attachments
SyvecsGPS.zip
(18.4 KiB) Downloaded 13 times
Post Reply