Grayhill Canbus Keypad

Post Reply
torana
Posts: 13
Joined: Fri Aug 11, 2017 10:28 am

Grayhill Canbus Keypad

Post by torana »

Hello,
Has anyone or is it possible to setup a Grayhill brand canbus keypad with canopen eg a 6 button style to be connected into a syvecs ecu S7 can to operate, pushbutton functions like:

https://www.grayhill.com/productattribu ... 206-2RN3AG

logging on/off
different boost levels
rolling antilag momentary switch
cal map selections
traction control levels
Syvecs Ed
Syvecs Staff - Cleaner
Posts: 16
Joined: Thu Mar 18, 2021 11:00 am

Re: Grayhill Canbus Keypad

Post by Syvecs Ed »

We can support these through custom firmware. You'd need to contact support.
torana
Posts: 13
Joined: Fri Aug 11, 2017 10:28 am

Re: Grayhill Canbus Keypad

Post by torana »

Sounds good,

Trying to do it without using a pdu
pavlo
Zen Performance
Posts: 407
Joined: Mon Aug 04, 2008 10:18 am

Re: Grayhill Canbus Keypad

Post by pavlo »

You don' t need custom firmware to do this. You can reprogram the keypad to send data in a format the S7 or above can read on custom can import.
Lqqk
Posts: 14
Joined: Thu Mar 19, 2020 3:40 pm

Re: Grayhill Canbus Keypad

Post by Lqqk »

Is there any more information on how to do this? I’m looking to do the same.
audpwr1
Posts: 2
Joined: Fri Mar 04, 2022 4:33 pm

Re: Grayhill Canbus Keypad

Post by audpwr1 »

Bringing this to the top.

I want to run a 15 position keypad in line with a S7i (new) and Pdu X3.

Does this work pretty seamlessly? Can I make the interaction of one button work on both units (button - 3 way Radiator On/OFF/ECU controlled). This would require both the ECM and the PDU seeing this and using logic
RICE RACING
Posts: 448
Joined: Mon Feb 24, 2014 1:08 am

Re: Grayhill Canbus Keypad

Post by RICE RACING »

audpwr1 wrote: Fri Mar 04, 2022 6:26 pm Bringing this to the top.

I want to run a 15 position keypad in line with a S7i (new) and Pdu X3.

Does this work pretty seamlessly? Can I make the interaction of one button work on both units (button - 3 way Radiator On/OFF/ECU controlled). This would require both the ECM and the PDU seeing this and using logic
Here is a small video showing the WM pump driven by the PDUx3
and description of button programming........
https://www.youtube.com/watch?v=Hrj-PcnZVJs


waterinj1.JPG
http://www.riceracing.com.au
https://www.youtube.com/riceracingdonmega
Real turbo road cars fast > reliable > durable
Water Injection Specialist
Post Reply