Page 1 of 1

Latest Base Map

Posted: Thu Mar 11, 2021 11:27 am
by Ryan.g
The latest Porsche 991 AWD Base map which matches the latest firmware can be found below in Attachments

Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.

1.15

Posted: Tue Apr 27, 2021 2:18 pm
by Ryan.g
1.15 Firmware base maps

1.18

Posted: Tue Oct 12, 2021 8:44 am
by Ryan.g
1.18 Base map, must be used with 1.18 Firmware

1.21 Base Map

Posted: Thu Nov 04, 2021 5:51 am
by Ryan.g
For use with 1.21 Firmware

1.23 Base Maps

Posted: Wed Jul 13, 2022 2:46 pm
by Ryan.g
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.23 Firmwares

1.24 Base Maps

Posted: Fri Nov 25, 2022 12:17 pm
by Ryan.g
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.24 Firmwares

1.25

Posted: Fri Apr 07, 2023 7:05 pm
by Ryan.g
For use with 1.25 firmware on X4AWD Units

Re: Latest Base Map

Posted: Fri Dec 15, 2023 5:51 am
by Ryan.g
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.

Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.

For use with 1.27 Firmwares