Syvecs Forums

Help Video going over the VVT Control Strategy and Setup

http://youtu.be/nUMNPQ_xydU

Download the Video from below if you wish

http://dl.dropbox.com/u/71964971/VVTi%20Control.wmv

Help Video going over the Nitrous control on the S6 and S8

http://youtu.be/EIeErn_507Y

Video is available for downloading below

http://dl.dropbox.com/u/71964971/Nitrous%20control.wmv

We will soon have a GPS Recieve which will not take any extra inputs up and work over CAN Bus

At present we have just put the Ethanol sensor control and a few blend tables into the S8 for testing as we have alot of customers in the US who have E85 on tap and are very capable calibrators for properly testing. Once a member of staff is back of holiday who does the Coding it will be finished of...

Yes Lorne has updated so you can select Syvecs on software now.

Will be doing a selection on Videos over the coming weeks and will hopefully put into a Help Section

Traction control - Basic setup and guide

View Below

http://youtu.be/wvqsR2coLRI

Download at Below link

http://dl.dropbox.com/u/71964971/Traction%20control.wmv

Quick List below of abbreviations used for some of the Parameters on the Syvecs Software Suite If the Units are not what you are used to, right click on the Parameter and Select Change Units ACT – Air Charge Temp AIT – Air Intake Temp ALS – AntiLag Calibration selected Bap – Barometric Pressure CalS...

viewtopic.php?f=8&t=322

Get asked alot about this tool so here is a link of where to purchase the tool for removing the Small pins from the S6GP

http://shop.t-g-s.de/product_info.php?p ... 1335044350

This Link is for S6 Firmware version 1.28 (PLEASE NOTE IF UPDATING FIRMWARE ON A DBW EQUIPPED INSTALLATION TO SEE NOTES IN RED) Changes in this release are as follows : 1) Launch control augmentation (as in S8): * launch limiter ignition cuts and new safety fuel cut map * launch control re-activatio...