Search found 719 matches
- Thu Aug 18, 2022 6:45 pm
- Forum: General Syvecs Chat
- Topic: Motec CAN Programming for 2 Syvecs 50Hz Receivers
- Replies: 8
- Views: 14625
Re: Motec CAN Programming for 2 Syvecs 50Hz Receivers
Only way to differentiate between the 2 GPS receivers is they each transmit data using unique CAN IDs. There's nothing you can do at the MoTeC end to magically distinguish data that is received on the same CAN ID from 2 different devices. I don't think there is a user interface to change the CAN IDs...
- Mon Aug 08, 2022 2:35 pm
- Forum: S6 GP/PnP Technical
- Topic: Supra loom adapter 4 way connector
- Replies: 6
- Views: 13482
Re: Supra loom adapter 4 way connector
If I need to change some pins on the expander connector, I assume you sell them or are they a standard pin? No, they are not a standard pin, but I don't have any more I'm afraid. Syvecs should do though. The X10 connector is a swine to work with. When inserting pins, they often don't go all the way...
- Mon Aug 08, 2022 12:40 pm
- Forum: S6 GP/PnP Technical
- Topic: Supra loom adapter 4 way connector
- Replies: 6
- Views: 13482
Re: Supra loom adapter 4 way connector
Ah, my bad - I didn't check the "Auto" loom adapter schedule before replying here
Standard pinout of the 4 pin connector when I made them was:
1 (Power Ground) S6 pin 44
2 (Paddle Up) X10 input 1, pin 13
3 (Vbat) S6 pin 20
4 (Paddle Down) X10 input 10, pin 22
Hope this helps.
Standard pinout of the 4 pin connector when I made them was:
1 (Power Ground) S6 pin 44
2 (Paddle Up) X10 input 1, pin 13
3 (Vbat) S6 pin 20
4 (Paddle Down) X10 input 10, pin 22
Hope this helps.
- Sun Aug 07, 2022 11:30 am
- Forum: S6 GP/PnP Technical
- Topic: Supra loom adapter 4 way connector
- Replies: 6
- Views: 13482
Re: Supra loom adapter 4 way connector
That 4-way connector was not a standard connector on S6GP MkIV Supra loom connectors, so it sounds like a dealer-specific modification/enhancement perhaps? If you connect up a laptop to the ECU and run SCal you can take a look at the pin assignments and see what the paddle shift is connected to - yo...
- Sun Jul 03, 2022 11:11 am
- Forum: VAG MQB5 Range - Audi RS3 / TTRS
- Topic: Exhaust valves won't stay closed bug
- Replies: 16
- Views: 20477
Re: Exhaust valves won't stay closed bug
In an attempt to give some kind of possible help, even given the lack of any technical information posted here about the problem... Mention has been made of PWM control. Is it controlled, by any chance, using an H-bridge output? If so, from memory dating back to when I was playing around with DBW co...
- Mon Jun 13, 2022 6:19 pm
- Forum: General Syvecs Chat
- Topic: Syvecs 50Hz GPS Module
- Replies: 8
- Views: 5143
Re: Syvecs 50Hz GPS Module
Also, this unit has a CAN0 LOW and HI, as well as a CAN1 LOW and HI. I have read that CAN just needs 2 connections, CAN low and CAN hi, to work. Since there are 2 sets of CAN low and CAN hi here, does that mean only one pair needs to be hooked up? Or do both need to be hooked up. Thanks for the hel...
- Mon Jun 13, 2022 6:17 pm
- Forum: General Syvecs Chat
- Topic: Syvecs 50Hz GPS Module
- Replies: 8
- Views: 5143
- Fri Jun 10, 2022 10:29 pm
- Forum: General Syvecs Chat
- Topic: Syvecs 50Hz GPS Module
- Replies: 8
- Views: 5143
Re: Syvecs 50Hz GPS Module
Only the pins in the manual are used.
- Tue May 31, 2022 9:32 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 35570
Re: need some dbw help
because it's an H bridge.....used as a pair. If one is positive, the other half of it can only be negative, and visa versa Pedantically, the drive can - and does - sometimes put positive, or negative, to both driver outputs simultaneously.... ...but, to grasp the basic operation it is 100% easier t...
- Tue May 31, 2022 9:09 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 35570
Re: need some dbw help
Current through the motor - including sign - is the result of all those pesky tablesstevieturbo wrote: ↑Tue May 31, 2022 8:54 pm What do you mean proper amount of current ?
That isn't a user option.