Search found 19 matches
- Tue May 31, 2022 9:16 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
I have another noob question. i have dbw + and dbw -wired to A2 and A3 pin of s7 . Why is there no label for dbw- in pin i/o ?
- Tue May 31, 2022 9:05 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
those were poor choice of words by me. pd gain and ig table
- Tue May 31, 2022 8:51 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
I figured out inversion on tables. Those depend on polarity . Just need to figure out how to send proper amount of current to move the blade .
Its a bosch 75mm tb on audi. In theory base map i got should be good enough for basic movement .
Its a bosch 75mm tb on audi. In theory base map i got should be good enough for basic movement .
- Tue May 31, 2022 6:37 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
After reviewing the dbw set up video, s6 is to be set up half bridge and s8 set to full bridge. I realize that video is almost 10 years old. What do i set s7 plus to half birdge or full bridge out put ? In full bridge mode i can get throttle to stay open at set base duty , but i have to move blade w...
- Mon May 30, 2022 9:44 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
Tried it out with pd and ig filled out both ways as described in video and scal you configured. Same thing no movement. i do hear slight change in sound from tb , but no movement. I have tried 2 known working tb.
- Mon May 30, 2022 9:18 pm
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
Re: need some dbw help
Thank you for the tip and adjustment to scal. i originally had pd and dg filled out by following dbw video. in the video those tables are set up backwards from what is set in scal you have adjusted . by backwards i mean positive error was filled with negative gain values . i will try settings you se...
- Mon May 30, 2022 4:22 am
- Forum: S7-I / S7Plus Technical
- Topic: need some dbw help
- Replies: 32
- Views: 31108
need some dbw help
Hi, need some help with dbw. Cant get throttle blade to move on new install. i have tps and pps signals , i think i have all the limits turned off. Have enable with engine off turned on, h bridge , configured out puts. Tried different output pins.tps a b match , pps a b match. No errors. Ican hear t...
- Thu Nov 04, 2021 6:22 pm
- Forum: General Syvecs Chat
- Topic: Base maps
- Replies: 1
- Views: 1729
Base maps
Hello. New s7plus wirein user. This is being installed in to a b7 s4 with 2.7tt engine swap. Factory ECU was ME7.1.1 At the moment im running my car with link thunder. Getting ready to swap in syvecs s7plus. Could someone please share an audi 3.2/ vw r32 base map and maybe an audi tfsi s3 base map ?...
- Tue Nov 02, 2021 11:51 pm
- Forum: S7-I / S7Plus Technical
- Topic: Base maps
- Replies: 0
- Views: 17891
Base maps
Hello. New s7plus wire im user. This is being installed in to a b7 s4 with 2.7tt engine swap. Factory ECU was ME7.1.1 At the moment im running my car with link thunder. Getting ready to swap in syvecs s7plus. Could someone please share an audi 3.2/ vw r32 base map and maybe an audi tfsi s3 base map ...