Syvecs Forums

Ryan.g wrote: ↑Tue Apr 16, 2024 5:20 am This is now done guys, will release with 1.752 firmware today

Loaded and tested yesterday. Works perfect Ryan. Thank you!

There's lots of other ways I could do it, but I prefer my OEM integration and would love a display.

Checking back in on this

There are 15 CM2xx (2d) and 15 CM3xx (3d) tables to make almost any strategy you can imagine using any inputs you'd like.

I’ll return it and get the correct 09 unit. I wasn’t trying to save anything but time since it was on the shelf at a local auto parts store. Thank you for the info.

Can anyone confirm if the LZA08-H6 can be used acceptably? I've been digging for 24 hours trying to sort this out. The LZA08-H6 is available at retail stores in my area so I can be mostly sure I'm receiving an authentic part and have it quickly.

I don't have a rotary switch. I use factory toggle buttons in a stalk, repurposed for map selection.

The tach would temporarily display the selected map as the maps are being changed then after a short pause, return to displaying engine speed, just like a Syvecs CAN based system...

Like all the modern kits do with CAN bus, it would be awesome if all the old cars out there with a pulsed tacho could get calSelect displayed temporarily on the tach like the new kits.

Not all the outputs go to ground when powered off. The H-bridge outputs do but the fuel outputs don't in my experience (S7+).

Please see my updated response. I was in a non-DI cal and thought the name was the same. Concept is the same just different name.