Syvecs Forums

will this work with life ecu also and dash 2pro

cheers

i have checked al my inputs and outputs and they all show 6v to earth .on the x10 .but not on the ecu . im trying to find a fault why my exhaust vvt does not work . the inlet solenoid is operated from ecu but exhaust had to come off the x10 it has worked in the past but failed a few times so had it ...

x10 outputs should there be any voltage on them with the ignition on . im finding im getting 6v to earth. what would cause this .
i was under impression it was a ground return to operate via ecu

all seemed to work in anger .

i have lowered the settings in the downshift from 15ms to 10 ms and this has sorted the problem [downshift positive return time]

gearbox striped down and no faults found .

YES HEWLAND FTR gearbox i only recalibrated just in case but voltages was pretty close . i have looked closer and i think the lever is bouncing out and mechanically upshifting again . i found a setting in the gear shift /down shift /down shift positive return time f[gear]they are set to 15ms i just ...

sorry it hewland ftr in a mygale ff200 using pneumatic actuator from paint ball bottle driven from ecu . set up been same for 2 years with not problems . started to have a couple of missed shifts on a test session last week . and when went to go out on next run had trouble with selecting reverse the...

i have just removed rear gearbox cover and oil and gears look perfect . that is with out removing any thing yet..then i remembered the air shift solenoids have a manual push button override .so i have tried this and gears select perfect but they dont stay in gear on the paddle and ecu control . anyo...