Page 1 of 1
6 pin connector for wideband
Posted: Fri Oct 02, 2009 12:36 pm
by secure
Anyone knows how to connect L1H1 to 6 pin wideband socket on S6GP?
Cheers
Re: 6 pin connector for wideband
Posted: Sun Oct 04, 2009 1:43 am
by secure
Wez wrote:Thanks Pat
Looks like i have an L2H2 and not an L1Ha, with my S6GP they should be pinned as follows :-
Yellow Heater +12V +12v supply
Blue Heater Drive from ECU Pin 46
Black Signal Ground to LAMGND Pin 34
Grey Nernst Cell Voltage to LAMV Pin 33
White Ion Pump Current to LAMI Pin 57
Can anyone help please? Which is the right pin order for the 6 pin wideband connector by this view? Calibration for NTK sensor would also be nice!!
Re: 6 pin connector for wideband
Posted: Thu Oct 08, 2009 6:08 pm
by secure
Anyone?
Re: 6 pin connector for wideband
Posted: Mon Oct 12, 2009 12:30 am
by Charlie
I'll give Pat a nudge about this.
Cheers,
Charlie
Re: 6 pin connector for wideband
Posted: Tue Oct 13, 2009 3:12 pm
by secure
Thanks Charlie! I think Pat is super busy in these days..
Re: 6 pin connector for wideband
Posted: Fri Oct 16, 2009 10:59 pm
by secure
Come on guys! Someone should already have done that!
Re: 6 pin connector for wideband
Posted: Mon Oct 19, 2009 2:08 pm
by pat
My bad. Sincere apologies about the delay, answers to be found
here
Re: 6 pin connector for wideband
Posted: Fri Oct 30, 2009 8:42 pm
by secure
YHM Pat.