The latest VAG MQB AWD Base map which matches the latest firmware can be found below in Attachments
Please note this is only a base file for the device and we recommend you speak with your dealer about calibrating the unit based on the car setup.
This base map limits the Max duty to 70%, Some users of the Rs3 Kit from Iroz motorsport have the duty limits at 80% or even 90%. You will need to adjust in Scal to Suit
Latest Base Map
Latest Base Map
- Attachments
-
- AwdBase_RS3 1.14.SC
- (37.21 KiB) Downloaded 2556 times
1.18
1.18 Base map, must be used with 1.18 Firmware
- Attachments
-
- AwdBase_RS3 1.18.SC
- (42.89 KiB) Downloaded 2247 times
1.21 Base Map
For use with 1.21 Firmware
- Attachments
-
- AwdBase_RS3 1.21.SC
- (46.26 KiB) Downloaded 2377 times
1.23 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.23 Firmwares
- Attachments
-
- AwdBase_RS3 1.23.SC
- (51.46 KiB) Downloaded 2244 times
-
- AwdBase_RS3 1.23 X4.SC
- (51.46 KiB) Downloaded 2233 times
1.24 Base Maps
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.24 Firmwares
- Attachments
-
- AwdBase_RS3 1.24.SC
- (55.83 KiB) Downloaded 2148 times
-
- AwdBase_RS3 1.24 X4.SC
- (55.78 KiB) Downloaded 2271 times
1.25
For use with 1.25 firmware on X4AWD Units
- Attachments
-
- AwdBase_RS3 1.25 X4.SC
- (61.05 KiB) Downloaded 2244 times
Re: Latest Base Map
In order to improve manufacturing time we have made dedicated AWD boards based on the new X4 GEN2 hardware. Because of this a different version of firmware and calibration is required for these boards as they have selectable pull ups for the inputs.
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
Orders placed from July 2022 will have these boards and look like the below. If you have this version and wish to update the firmware then use the X4 version attached. Older hardware use the normal AWD version.
For use with 1.27 Firmwares
- Attachments
-
- AwdBase_RS3 1.27.SC
- (66.84 KiB) Downloaded 412 times
-
- AwdBase_RS3 1.27 X4.SC
- (66.87 KiB) Downloaded 425 times
Re: Latest Base Map
For use with 1.28 Firmwares
- Attachments
-
- AwdBase_RS3 1.28 X4.SC
- (72.44 KiB) Downloaded 34 times
Re: Latest Base Map
For use with 1.29 Firmwares
- Attachments
-
- AwdBase_RS3 1.29 X4.SC
- (72.89 KiB) Downloaded 38 times