Running a Diff Coolant Pump

Post Reply
mgc1985
Posts: 2
Joined: Mon Apr 27, 2015 7:08 pm

Running a Diff Coolant Pump

Post by mgc1985 »

Hi all,

Forgive the potentially basic question, still learning the Syvecs systems.

I'm running a temperature sensor in the diff and need to drive a coolant pump when it exceeds a certain temp.
Is there a way of configuring the Fan outputs in SCal to achieve this?

The main question is changing ectmax in one of the fan on/off menus to differential temperature. If that's possible then I think I know what I'm doing!

Thanks

stevieturbo
Posts: 930
Joined: Sun Dec 07, 2008 2:04 pm

Re: Running a Diff Coolant Pump

Post by stevieturbo »

You can easily assign one of the Fan outputs to trigger an output based on diff temp seeing as you have a sensor.

ECT is Engine coolant temp.

Assign one of the universal inputs to diff temperature and use it ( or your base map may already have some assigned to this term )

Go into View, Customising options, Output Functions then the Fan output you wish to use.
Then select the input you want it to be based around.

this should explain some

https://www.youtube.com/watch?v=IVIdYESOuOQ

mgc1985
Posts: 2
Joined: Mon Apr 27, 2015 7:08 pm

Re: Running a Diff Coolant Pump

Post by mgc1985 »

Great, thank you.
It was the customising options part that I didnt know.

Much appreciated.

Post Reply