Page 1 of 1

R35 Coils - Wire direct?

Posted: Thu Aug 01, 2019 8:57 pm
by jezzpalmer
Hello,

I've been running SR20 Splitfire coils on my 4G63 until now but they are struggling over 2 bar and I'm down to 0.5mm plug gap, which isn't great; so I've bought some R35 coils to replace them with.

As far as I can tell the R35 coils have built in ignitors and the signal input can be wired directly to the S6 ECU IGN outputs with no ignitor, is that correct?

Cheers,
Jezz.

Re: R35 Coils - Wire direct?

Posted: Fri Aug 02, 2019 7:04 pm
by stevieturbo
I do believe that is correct.

Re: R35 Coils - Wire direct?

Posted: Fri Aug 02, 2019 7:20 pm
by jezzpalmer
Cheers Stevie. 8-)