S7-I and S7Plus Can1 Fixed Datastream

Post Reply
Syvecs Staff - Caretaker
Posts: 278
Joined: Fri May 30, 2008 3:05 pm

S7-I and S7Plus Can1 Fixed Datastream

Post by Ryan.g » Fri Mar 29, 2019 6:16 am

The S7-I and S7Plus Can1 Datastream is fixed so that with our plug and play kits users can't accident change items on the datastream which have a large effect on the Canbus for the Plug and Play kits.

Users can use Can2 on the S7Plus from pins B2 and B3 and this is fully programmed and can also support a I/O Expander.

If you are using a Generic ECU then the Datastream will be now as attached from Can1
S7 Default Stream_05.SC
(546.09 KiB) Downloaded 112 times

Post Reply