CAN bus as inputs
Posted: Thu Sep 12, 2019 8:19 pm
Is it possible to drive inputs to the S6 Plus through CAN bus frame values?
For example if I wanted to drive Engine Load (for idle up), or GPS position and G sensors into the S6 via CAN bus.
I am able to send out the data I need and customer the CAN payload from another device, I just want to make the S6 receive and act on it.
Thanks in advance.
For example if I wanted to drive Engine Load (for idle up), or GPS position and G sensors into the S6 via CAN bus.
I am able to send out the data I need and customer the CAN payload from another device, I just want to make the S6 receive and act on it.
Thanks in advance.