Page 1 of 1

Running a Diff Coolant Pump

Posted: Sun Feb 17, 2019 9:50 pm
by mgc1985
Hi all,

Forgive the potentially basic question, still learning the Syvecs systems.

I'm running a temperature sensor in the diff and need to drive a coolant pump when it exceeds a certain temp.
Is there a way of configuring the Fan outputs in SCal to achieve this?

The main question is changing ectmax in one of the fan on/off menus to differential temperature. If that's possible then I think I know what I'm doing!

Thanks

Re: Running a Diff Coolant Pump

Posted: Mon Feb 18, 2019 5:35 pm
by stevieturbo
You can easily assign one of the Fan outputs to trigger an output based on diff temp seeing as you have a sensor.

ECT is Engine coolant temp.

Assign one of the universal inputs to diff temperature and use it ( or your base map may already have some assigned to this term )

Go into View, Customising options, Output Functions then the Fan output you wish to use.
Then select the input you want it to be based around.

this should explain some

https://www.youtube.com/watch?v=IVIdYESOuOQ

Re: Running a Diff Coolant Pump

Posted: Mon Feb 18, 2019 6:52 pm
by mgc1985
Great, thank you.
It was the customising options part that I didnt know.

Much appreciated.