Ignition retarding

For Subaru Technical Chat
stevieturbo
Posts: 1321
Joined: Sun Dec 07, 2008 2:04 pm

Re: Ignition retarding

Post by stevieturbo »

Knock base will log as CYlXknockthresh

Logging rate shows at bottom of screen
knckhz.jpg
knckhz.jpg (62.07 KiB) Viewed 14499 times
stevieturbo
Posts: 1321
Joined: Sun Dec 07, 2008 2:04 pm

Re: Ignition retarding

Post by stevieturbo »

ScoobyDuck wrote:
I will raise those first 2 cells. As its so quiet (although that depends on gain i guess (curerntly set to 1.231))

I wonder if Syvecs are still doing the 'upgrade' (I thought it was free at one point? or was i asleep again :P ).

thanks
Steve
That isnt a low gain value at all.....of course not all sensors or engines are the same, so it's up to you to determine what is right for your setup.

I dont believe the upgrade is free, but it is available if you send the ecu in.
ScoobyDuck
Posts: 49
Joined: Mon Aug 17, 2009 4:24 pm
Location: South Uk

Re: Ignition retarding

Post by ScoobyDuck »

Rate - F1 Help -didnt have that on ! Thanks!
I've tried CYLxKnockthresh and its not there for the S6 v1.74.2 using a new config, not my own. So i guess there is a bug there somewhere (or i need a new cfg file?)

ok to upgrade - i idnt think it would be free :p

thanks
Steve
Attachments
knocklist.png
knocklist.png (10.4 KiB) Viewed 14477 times
stevieturbo
Posts: 1321
Joined: Sun Dec 07, 2008 2:04 pm

Re: Ignition retarding

Post by stevieturbo »

send me your email.
ScoobyDuck
Posts: 49
Joined: Mon Aug 17, 2009 4:24 pm
Location: South Uk

Re: Ignition retarding

Post by ScoobyDuck »

Thanks Stevie

Knockthreshold now on scfg, Areas at low knockbase raised slightly. More logging needed to see whats going on.
Also lowered the Hz of knock as that was wiping out my logging memory a bit.

Steve
Post Reply