G11 trigger pattern with wasted spark coil

For Subaru Technical Chat
Post Reply
EMS
Posts: 41
Joined: Tue Oct 12, 2010 2:24 pm

G11 trigger pattern with wasted spark coil

Post by EMS »

I assume this will work with S6, can somebody confirm?

Thanks,

Mark.
pat
Syvecs Staff - Cleaner
Posts: 356
Joined: Fri May 23, 2008 10:23 am
Location: Out there... somewhere
Contact:

Re: G11 trigger pattern with wasted spark coil

Post by pat »

Yep. The pattern and the type of ignition (sequential, wasted spark or dizzy) are pretty much independent (save the requirement for 720 sync if you want sequential, of course).

Cheers,

Pat.
EMS
Posts: 41
Joined: Tue Oct 12, 2010 2:24 pm

Re: G11 trigger pattern with wasted spark coil

Post by EMS »

Perfect! :)
pavlo
Zen Performance
Posts: 407
Joined: Mon Aug 04, 2008 10:18 am

Re: G11 trigger pattern with wasted spark coil

Post by pavlo »

You can also use it with a g10 camwheel using Manual Cam Checklist
pat
Syvecs Staff - Cleaner
Posts: 356
Joined: Fri May 23, 2008 10:23 am
Location: Out there... somewhere
Contact:

Re: G11 trigger pattern with wasted spark coil

Post by pat »

Manual cam checklist will work with G11 but not G10 since G10 cannot key the crank on its own. Only patterns that can achieve 360 sync on their own can use the manual cam checklist to then get into 720 sync. You can of course use wasted spark on G11 whether normally synced, manual cam checklist or of course in 360 sync :)

Cheers,

Pat.
Post Reply