kelford V2-199-C cams

For Subaru Technical Chat
Post Reply
garyf
Posts: 27
Joined: Mon Aug 15, 2011 8:57 pm

kelford V2-199-C cams

Post by garyf »

Hi Im fitting some kelford V2-199-C cams, engine is a 2.5, does anyone have any base clossed loop vvt figures for these cams? I have a feeling they will be nothing like the std figures for the sti7 cams, just something sensible to get me going.
gazzasti1
Posts: 13
Joined: Fri Sep 11, 2009 6:47 pm

Re: kelford V2-199-C cams

Post by gazzasti1 »

hi

setup your offsets when warm at right rpm and then tune the car to suit .

standard tuning tbh .
gazzasti1
Posts: 13
Joined: Fri Sep 11, 2009 6:47 pm

Re: kelford V2-199-C cams

Post by gazzasti1 »

also if your unsure on drive target being right.

take the vvt soleniods out of equation by unplugging easy to get them right
garyf
Posts: 27
Joined: Mon Aug 15, 2011 8:57 pm

Re: kelford V2-199-C cams

Post by garyf »

Hi cheers Im fine with the latch points, it was the amount of advance I should target I wasnt sure about since these cams have way more duration than the std sti cams. I was just looking for a safe figure to get me running, the std cams are around 35 - 40 degress on my setup, Ive gone for 11 degrees with these and alls good.
Post Reply