GPS Input
Re: GPS Input
We will soon have a GPS Recieve which will not take any extra inputs up and work over CAN Bus
-
- Posts: 9
- Joined: Wed Aug 11, 2010 2:13 am
Re: GPS Input
Any chance we will be able to pipe in other info from CAN? I have found a thermocouple amp that outputs data on CAN and would love to log this info for testing but I wont have enough inputs left on the S6 when I get to that point.
Re: GPS Input
Just to check - I presume you know you have 1 thermocouple input on an S6 already?
-
- Posts: 9
- Joined: Wed Aug 11, 2010 2:13 am
Re: GPS Input
Sorry to high jack this thread. Yes I know the S6 has one thermocouple input. However I would like to log front anslx rear egt's as well as rotor housing temperatures (with a sparkplug thermocouple). I like to log as much info as possible and if I can gain inputs via some CAN interface that would be amazing.
Re: GPS Input
Have you got a link to the CANbus EGT amplifier (or the product name)? Sounds interesting
-
- Posts: 9
- Joined: Wed Aug 11, 2010 2:13 am
Re: GPS Input
Here's one I found : http://www.texense.com/en/produits/worl ... rs_74.html
Re: GPS Input
Any idea how much that is?
-
- Posts: 9
- Joined: Wed Aug 11, 2010 2:13 am
Re: GPS Input
900 USD, cheaper than upgrading to a S8 just for a few more inputs.
Re: GPS Input
PCS has EGT-2000, 8-channel CAN-bus interfacing EGT product. Price approximately 400 USD.
http://www.powertraincontrolsolutions.com/EGT2000.php
http://www.powertraincontrolsolutions.com/EGT2000.php