Cat5 Wiring

Pin outs, sensor calibrations etc
Post Reply
Ryan.g
Syvecs Staff - Caretaker
Posts: 278
Joined: Fri May 30, 2008 3:05 pm

Cat5 Wiring

Post by Ryan.g » Fri Aug 01, 2008 10:10 pm

Howdy

Would the Staff cleaner on here be able to help me :mrgreen:

Just sorting the pinouts for the MR and could you possibaly help with the pinouts for the cat5 wiring. Totally forget how we did it on the supra :lol:

Here is a diagram on the cat5 pins to help explain which pins on the s6 go to which pins on the RJ45 connector

Image

Ryan

pat
Syvecs Staff - Cleaner
Posts: 354
Joined: Fri May 23, 2008 9:23 am
Location: Out there... somewhere
Contact:

Re: Cat5 Wiring

Post by pat » Sat Aug 02, 2008 9:03 am

Standard Ethernet wiring is :

Pin 1 - Transmit + - Goes to Receive + on Solaris
Pin 2 - Transmit - - Goes to Receive - on Solaris
Pin 3 - Receive + - Goes to Transmit + on Solaris
Pin 6 - Receive - - Goes to Transmit - on Solaris

In effect you're making a crossover cable to be able to plug straight into a PC.

Don't forget that you needs pairs on 1&2 and 3&6 !

Hope this helps,

Pat.

Edit : Typo (Pin 6 read Pin 4 previously)
Last edited by pat on Tue Aug 05, 2008 2:50 am, edited 1 time in total.

Wez
Santa's Little Helper
Posts: 265
Joined: Thu May 22, 2008 2:19 pm
Location: London

Re: Cat5 Wiring

Post by Wez » Mon Aug 04, 2008 8:04 pm

pat wrote: Don't forget that you needs pairs on 1&2 and 3&6 !
Not wishing to sound stupid Pat but you listed Pins 1 to 4 above and said use pins 1&2 and 3&6 or am I missing something.

Should 3&4 be 3&6?
96 MKIV Supra, S6GP, 591bhp & 523ft/lbs

pat
Syvecs Staff - Cleaner
Posts: 354
Joined: Fri May 23, 2008 9:23 am
Location: Out there... somewhere
Contact:

Re: Cat5 Wiring

Post by pat » Tue Aug 05, 2008 2:49 am

Should 3&4 be 3&6?
Yes. Typo. My bad! I will edit the above so that others that look don't end up wiring it wrong.

Cheers,

Pat.

Ryan.g
Syvecs Staff - Caretaker
Posts: 278
Joined: Fri May 30, 2008 3:05 pm

Re: Cat5 Wiring

Post by Ryan.g » Tue Aug 05, 2008 9:24 am

Glad you mentioned it Wes :lol: Didn't want to post just incase it was right and i was being stupid :lol:

p.s Pat get to bed earlier (3.49am) stop waiting for television x to start :lol:

Post Reply