Syvecs Forums

hi there just wondering what pins to use on the s6gp to handle the a/c request

i have a blue/red wire from the a/c switch to turn on and a brown wire to go to the a/c clutch relay

many thanks rob

You can assign the swith to any input, but you need to find out if the input goes high or low when switched, if you used AN05-AN08 you will be able to use any switch config. The clutch relay will need to be wired with one side of the coil to ignition switched +12v and the other to either a spare fuel or PWM (aux) output. The pins can be found in the wiring guide here: viewtopic.php?f=6&t=401