Search found 162 matches
- Sun Sep 10, 2017 9:08 am
- Forum: General Syvecs Chat
- Topic: Ignition Advance When Knock Control Active
- Replies: 9
- Views: 20089
Ignition Advance When Knock Control Active
Can anyone clarify just how 'Ignition Advance When Knock Control Active'? ..Its not clear from the manual or the sCAL help whether: 1) Its applying the entire value at (x)RPM on top of ignBase and then relying on the knock control to step back to a 'safe' value or 2) Whether its gradually applying a...
- Fri Sep 08, 2017 8:44 pm
- Forum: General Syvecs Chat
- Topic: CAN output to Plex micro SDM
- Replies: 4
- Views: 10179
Re: CAN output to Plex micro SDM
Well 'partially' in fairness - no instructions came with the uSDM - and there's still nothing but a a wiring diagram online so I was basign things on the SDM 500. In the end it turned out to be the CAN bus speed - I was set @ 1.33 Mbit Syvecs - dropping this to 1 Mbit sorted the issue - which surpri...
- Fri Sep 08, 2017 7:03 pm
- Forum: General Syvecs Chat
- Topic: CAN output to Plex micro SDM
- Replies: 4
- Views: 10179
CAN output to Plex micro SDM
Just fitted a micro SDM and connected to the S6plus - haven't completely finished configuring the PLEX CAN receive but right now I don't appear to be receiving any date at all - was expecting to at lest see RPM from the get go. Datastream is set as Cusom CAN on both ends - don;t suppose anyone can t...
- Fri Sep 01, 2017 7:27 am
- Forum: General Syvecs Chat
- Topic: Knock sensor - shielded cable?
- Replies: 11
- Views: 22481
Re: Knock sensor - shielded cable?
Cheers chaps.
- Thu Aug 31, 2017 3:38 pm
- Forum: General Syvecs Chat
- Topic: cylinder trims
- Replies: 3
- Views: 7318
Re: cylinder trims
Just checked mine - working as expected in graphical / textual & 'both' views...
- Thu Aug 31, 2017 9:44 am
- Forum: General Syvecs Chat
- Topic: Knock sensor - shielded cable?
- Replies: 11
- Views: 22481
Knock sensor - shielded cable?
Pretty sure on this but could anyone conform I *should* ideally be using a shielded cable for connecting a regular bosch type knock sensor? Only my adapter loom was supplied with non-shielded twisted pair.
- Wed Aug 30, 2017 3:01 pm
- Forum: General Syvecs Chat
- Topic: SSuite 2.15.72
- Replies: 0
- Views: 27082
SSuite 2.15.72
Nice work on SSuite 2.15.72 - only just realized it was out - global option Black on White color scheme and the under graph fill in in SView are spot on!
...assuming they weren't there already and i'd just missed them of course....
...assuming they weren't there already and i'd just missed them of course....
- Fri Aug 25, 2017 8:48 am
- Forum: General Syvecs Chat
- Topic: Plex / Syvecs logs.
- Replies: 2
- Views: 6258
Re: Plex / Syvecs logs.
Interesting - not even something similar to the dedicated Syvecs control page? Digging into this a little further I read from Plex on their Analysis S/W: (https://www.plex-tuning.com/products/plex-data-analysis-sw/) - "Take advantage of the Plex Data Analysis SW and use it to analyse data from ...
- Thu Aug 24, 2017 12:35 pm
- Forum: General Syvecs Chat
- Topic: Defi and Syvecs 4bar disagreement!
- Replies: 32
- Views: 58308
Re: Defi and Syvecs 4bar disagreement!
Thanks Ryan - that's helpful.Ryan.g wrote:0mbar = 0v
1000mbar = 1.20v
4000mbar = 4.75v
Reassuring to see also that my manual measurements using the DEFI to calibrate were remarkably close to hose points!
- Tue Aug 22, 2017 3:05 pm
- Forum: General Syvecs Chat
- Topic: Defi and Syvecs 4bar disagreement!
- Replies: 32
- Views: 58308
Re: Defi and Syvecs 4bar disagreement!
Thanks Ryan - can you tell me - is the sensor data published anywhere? - mine came without anything...