Search found 162 matches

by dr_jones
Fri Sep 15, 2017 12:44 pm
Forum: General Syvecs Chat
Topic: More Syvecs Plex CAN struggles
Replies: 9
Views: 19652

Re: More Syvecs Plex CAN struggles

All good now - thanks for the steer.

These settings were golden:
knock_settings.JPG
knock_settings.JPG (28.72 KiB) Viewed 19864 times
I also upped the transmit frequency to 25Hz for knock - though I'm wondering if I shouldn't go higher still?
by dr_jones
Tue Sep 12, 2017 8:19 am
Forum: General Syvecs Chat
Topic: trouble going from FW 1.74 --> 1.79
Replies: 7
Views: 14791

Re: trouble going from FW 1.74 --> 1.79

Ah ok - thanks - I did not realise that.
by dr_jones
Tue Sep 12, 2017 8:18 am
Forum: General Syvecs Chat
Topic: More Syvecs Plex CAN struggles
Replies: 9
Views: 19652

Re: More Syvecs Plex CAN struggles

Thanks! I'll give it a look later this week.
by dr_jones
Mon Sep 11, 2017 9:57 pm
Forum: General Syvecs Chat
Topic: More Syvecs Plex CAN struggles
Replies: 9
Views: 19652

Re: More Syvecs Plex CAN struggles

Cheers and yes I abbreviated them initially in the plex - but yes Cyl01Knock...Cyl04Knock in SCal.

Didn't spot that scaling data in sCal - sounds like that may well be the key.

My cals attached for reference.
by dr_jones
Mon Sep 11, 2017 9:44 pm
Forum: General Syvecs Chat
Topic: trouble going from FW 1.74 --> 1.79
Replies: 7
Views: 14791

Re: trouble going from FW 1.74 --> 1.79

Will do - also interesting to see cylinders 9 thru 12 listed there - what with this being a S6+ and all...
by dr_jones
Mon Sep 11, 2017 7:27 pm
Forum: General Syvecs Chat
Topic: More Syvecs Plex CAN struggles
Replies: 9
Views: 19652

More Syvecs Plex CAN struggles

Seem to have most of the CAN output available and working on the plex but have come up against a problem in trying to display cyl01Knock - in that, well, I can't. Have assigned on the Syvecs side as folows: 1 2 3 4 20 cyl1Knk cyl2Knk cyl3Knk cyl4Knk And set the corresponding channels on the Plex 0 2...
by dr_jones
Mon Sep 11, 2017 6:32 pm
Forum: General Syvecs Chat
Topic: trouble going from FW 1.74 --> 1.79
Replies: 7
Views: 14791

Re: trouble going from FW 1.74 --> 1.79

Yep - converted my cal to 1.79, flashed FW to 1.79 - loaded from disk - all apparently successful - however checking further in 1.79 I have Outputs : Sync Out as UNDEFINED - which I guess is the issue - thing is its not there at all (at least not that I can see) in v1.79 and my only choices are NOT ...
by dr_jones
Mon Sep 11, 2017 3:29 pm
Forum: General Syvecs Chat
Topic: trouble going from FW 1.74 --> 1.79
Replies: 7
Views: 14791

trouble going from FW 1.74 --> 1.79

Ran in to an issue today going from FW 1.74 --> 1.79 on the S6plus. Seems related to 'sync out'the error I get once at level 1.79 is: SYNCOUT : unknown pin : 65535 *** Boot code assuming control *** Not had this issue previously between firmwares - and I see from the FW notes that there are some syn...
by dr_jones
Mon Sep 11, 2017 3:23 pm
Forum: General Syvecs Chat
Topic: CAN output to Plex micro SDM
Replies: 4
Views: 9962

Re: CAN output to Plex micro SDM

Ah - I see - thanks Pat - yes that makes sense.
by dr_jones
Sun Sep 10, 2017 12:45 pm
Forum: General Syvecs Chat
Topic: Ignition Advance When Knock Control Active
Replies: 9
Views: 19697

Re: Ignition Advance When Knock Control Active

Thanks for clarifying - certainly seems to be doing the trick in the video there...