Syvecs Forums

Since the unlock I can now see tcSpinErr, tcSpinTarg, tcTrq, radarSpeed (and other radar channels, no idea what they are), rl and rr speed channels, a load of wg channels (again no idea what they are) ie wg3MapErrPct1, wgIgnRtd1, plus paddleSwitch channels.

I'm at Mallory Park next wednesday Stevie, I'll try a few different settings out.

My cars launch ramp mode is Speed, so it must be exiting the LC at 10mph. I'll increase that speed, and I'll also have a think about using the timer instead of vehicle speed, to see if that makes much difference.

Thanks again, its making sense now. The deviation from Launch brings me on to the next issue, which is the transition from launch to TC, but I'll try to figure out TC first before I start considering changes for my launch settings. Thanks for the tip on loading the sample file from the Life site. I ...

Cheers Stevie Where do I set the number of speed breakpoints? For the graphs, where spin target 1 is set to 30% at 0.25G at 10MPH, what does that actually mean? And does the gradient slope in the right direction? Is it too aggressive? I have 11 cal positions for the TC switch, so is it best to use p...

On the video it shows 11 speed breakpoints, but on my Life F88 ECU it shows I have 15 breakpoints? Is the number of breakpoints configurable, or is it down to firmware changes that has increased the number of breakpoints since the video was made? Also if I change the speeds on my 15 breakpoints, whe...

Besides changing the tyre circumference, what effect does the Tyre Type switch have on launch and traction control?

In 2018, the car was tuned again, and this time we found over 300ftlb, which makes it very quick to drive, and I finished 9th in the championship so I get to run number 9 this year. Last summer Ford agreed to open up the paid for elements of the ECU so I can now make changes to launch and traction c...

Is the X10 man enough to run injectors?

Looking at adding two to my 1.6T EcoBoost which uses GDI by default but needs more fuel to break the 320bhp ceiling.

Hi Mark

I used Visio Professional 2016 to create the schematics