Search found 56 matches

by Jasper K
Sat Dec 17, 2011 4:05 pm
Forum: S6 GP/PnP Technical
Topic: NTK L2H2 vs. LC-1 w/ LSU 7200 differences
Replies: 5
Views: 10466

Re: NTK L2H2 vs. LC-1 w/ LSU 7200 differences

Mark, Yes everything is sorted now. The LATER NTK sensors supplied by Syvecs (Charlie) need a different linearisation than the earlier ones. After setting up the new linearisation which should apply to probably all sensors from 2011+ gotten from Charlie it works a charm. All credit however goes to R...
by Jasper K
Sat Dec 17, 2011 4:00 pm
Forum: S6 GP/PnP Technical
Topic: Knock Frequency
Replies: 4
Views: 9682

Re: Knock Frequency

Mark, From what I have read about the "2nd harmonic" approach is that it has nothing to do with the sensors since they are wideband sensors anyways. The METHOD of measurement is what is different. The reason some manufacturers went to listen to the 2nd harmonic to trace knock was due to th...
by Jasper K
Mon Dec 05, 2011 4:14 am
Forum: S6 GP/PnP Technical
Topic: Basic Knock parameters
Replies: 1
Views: 4154

Basic Knock parameters

I've used Firmware v1.20 in the past and I was happy to be able to log Knock Thresholds, Knock ignition retards, Knock Free Cycles and Knock values. However now with the newer v1.23 firmware these items have disappeared and I can now only log Knock values and Knock ignition retards. I would like to ...
by Jasper K
Sun Oct 30, 2011 9:46 am
Forum: S6 GP/PnP Technical
Topic: closed loop lambda problem
Replies: 5
Views: 10744

Re: closed loop lambda problem

Hi Ashley,

Are you sure you are applying the CL Fuel to the same BANK as your Cylinders are assigned to?? Otherwise it won't work. EG. When your cylinders 1 to 4 are assigned to Bank 1 you must apply the CL Fuel to Bank 1 as well.

Jasper.
by Jasper K
Mon Sep 12, 2011 11:57 am
Forum: S6 GP/PnP Technical
Topic: Injection End Angle
Replies: 27
Views: 68679

Re: Injection End Angle

So far I have been reading different things: - Some people seem to say to tune the end angle to get the richest AFR at a certain RPM point with the same amount of Injector MS. (read amount of fuel) being injected. The theory seems to make sense as the same amount of injected fuel would use up the mo...
by Jasper K
Sun Sep 04, 2011 11:31 am
Forum: Feature Requests
Topic: 3D Injection End Angle settings
Replies: 0
Views: 8846

3D Injection End Angle settings

Hi there, I believe it would perhaps be beneficial to have 3D mapping of the Injection End Angle due to the vastly different requirement at the same REVs based on MAP. I noticed that on my buddies HKS F con V Pro there is a 3D setting available for this where you can input End Angle based on RPM and...
by Jasper K
Sun Sep 04, 2011 11:27 am
Forum: S6 GP/PnP Technical
Topic: Injection End Angle
Replies: 27
Views: 68679

Injection End Angle

All, I have had Tip-In issues from the beginning and no matter how I changed the Transient Fueling properties it always felt hesitant on blips from Idle. I noticed that my Injection End Angle was set to 540 degr. as that was in the basemap from the start and I didn't fiddle with it. Afterwards I got...
by Jasper K
Fri Aug 12, 2011 6:02 pm
Forum: S6 GP/PnP Technical
Topic: Cal Switch settings
Replies: 11
Views: 26124

Re: Cal Switch settings

Paul,

All sorted now!

Tim,

Also thanks for your help.
by Jasper K
Fri Aug 12, 2011 5:31 pm
Forum: S6 GP/PnP Technical
Topic: Cal Switch settings
Replies: 11
Views: 26124

Re: Cal Switch settings

Hi Tim, My CalswitchV are: 0.015 - 0.59 - 1.163 - 1.718 - 2.251 - 2.763 - 3.253 - 3.727 So according to these values the settings should work properly. Paul, You might be on the right track here. It DOES make sense now that I think of it that the device should be programmed first before Cal. switch ...
by Jasper K
Wed Aug 10, 2011 8:49 pm
Forum: S6 GP/PnP Technical
Topic: Cal Switch settings
Replies: 11
Views: 26124

Re: Cal Switch settings

I have tinkered around with the settings again and I still cannot get all the positions to show correctly..... I have checked the Voltage of the CAL.SW at each position and put the thresholds RIGHT in the middle as also recommended by Pat. Same happened as before. Cal01, 02, 03, 04, 05 are fine. How...