Syvecs Forums

Didn't notice these replies! I have just received some ebay 40a fotek SSR's. All my fans and fuel pumps have individual fuses and relays, and all on 15 amp fuses. They all pull just under 15amps each. I chose 40A continuous ones as the copies usually have 25A triacs, so I thought even if they are fa...

Thanks for the reply Tim

I'll probably fit 2 to get plenty of air in, has anyone wired one of these valves up before? I assume you need all 3 connections, perhaps a 12v then a pwm for open and close?

Thanks

Graeme

Hi All Just trying to think of ways to get some more air into my engine to increase the effectiveness of my anti lag, and because nothing is ever enough and I always have to be messing around with something! Anyway, I dont really want to mess with my idle control and I dont have drive by wire (my id...

Thanks for the replies guys I am aware there are some copies, I was going to use 40a for less than 20a load just incase and I was also going to install quick blow fuses on the ecu output side to the relay in case an internal failure caused the ecu to take the load. I am thinking of buying one and co...

Can someone move this to the s6gp forum please
Thanks

Hi I am currently changing my fuel system to incorporate a surge tank, so I will be running 3 bosch 044 pumps instead of 2. Ryan gave me the idea a while ago about using a solid state relay to control my pumps through solid state relays to reduce heat into the fuel system at slower speeds. One pump ...

Hi I have a car PC and I run smon all the time. Are there any plans to create more graphics options for the gauges? It would be nice to have some other options similar to the standalone dash displays and maybe be able to rename the gauges also. Seems like the trouble has been taken to develop the sm...

PM sent

Thanks for the reply, I just liked the press ad it was easier than making my own up haha. I don't think I've changed anything, I even installed the entire suite again. I'll have a play around when I get time.

Thanks

Hi Im not fluent with the software, but last time I used sview i had options for layouts, showing wastegate control, engine health, knock etc which you selected and the graphs were all pre laid out, I just cant find where it is anymore? Also I run an in car PC and I have smon opening automatically, ...