Search found 60 matches
- Sun Aug 28, 2016 5:36 pm
- Forum: S8 Technical
- Topic: Bosch LSU4.9 on S8
- Replies: 10
- Views: 21229
Re: Bosch LSU4.9 on S8
Ryan confirmed that the LSU 4.9 can be used on the S8 :) This is his repy "The Bosch LSU can be used with the S8 but the heater control is not as good as the S6Plus which means the life span is a little shorter but its never become an issue for anyone, some clients have been doing this for year...
- Sun Aug 28, 2016 11:09 am
- Forum: S8 Technical
- Topic: Bosch LSU4.9 on S8
- Replies: 10
- Views: 21229
Re: Bosch LSU4.9 on S8
http://www.syvecs.co.uk/support/product ... d-pinouts/
Scroll down to ECU Pinouts and wiring guides and download S8 wiring guide and pinouts pdf and see page 14 and 15....
Scroll down to ECU Pinouts and wiring guides and download S8 wiring guide and pinouts pdf and see page 14 and 15....
- Fri Aug 26, 2016 9:34 am
- Forum: S8 Technical
- Topic: Bosch LSU4.9 on S8
- Replies: 10
- Views: 21229
Re: Bosch LSU4.9 on S8
Thanks guys but are you sure because I have downloaded the S8 wiring/pinouts guide from website and it says that it can be used. I have sent an email to Ryan to be sure. On manual it says that solder bridges need to be changed in order to make different sensors to work. I will let you know when I ha...
- Thu Aug 25, 2016 4:26 pm
- Forum: S8 Technical
- Topic: Bosch LSU4.9 on S8
- Replies: 10
- Views: 21229
Bosch LSU4.9 on S8
Hi guys, can the Bosch LSU4.9 be wired inn and used on the S8.
I usually use the NTK L2H2 but the new Bosch is cheaper and have quite a wide range of operation.
Thanks
I usually use the NTK L2H2 but the new Bosch is cheaper and have quite a wide range of operation.
Thanks
- Mon Jun 27, 2016 9:00 pm
- Forum: S8 Technical
- Topic: Secondary injectors setup
- Replies: 9
- Views: 21608
Re: Secondary injectors setup
Ok, now all make sense, Thanks Rice racing great post :) So the maps i mentioned are not used in my case. The injector split 1 map is used to command when they start to inject but still the overall fueling are from the Base Injection time 1,2..etc maps.. And thanks to Stevie_turbo also for more clar...
- Sun Jun 26, 2016 4:19 pm
- Forum: S8 Technical
- Topic: Secondary injectors setup
- Replies: 9
- Views: 21608
Secondary injectors setup
Hi, I installed another set of injectors to a total of 8 2200cc injectors on a 4 cylinder turbocharged drag engine and configured the IO configuration. Now how do the maps secondary load injection maps and secondary load injection time blend work exactely as i am confused abit. Since one of the maps...
- Sat May 17, 2014 5:28 pm
- Forum: S8 Technical
- Topic: Possible plug fouling during launch control
- Replies: 1
- Views: 4870
Possible plug fouling during launch control
Hi, I am noticing that during the burnout and launch some cylinders drop out and take some time to recover and at random not always the same cylinders.
Have someone experienced this in there cars? maybe I have the Fuel/ign/retard cut set to aggresive and I need to revise them abit.
Have someone experienced this in there cars? maybe I have the Fuel/ign/retard cut set to aggresive and I need to revise them abit.
- Wed Feb 19, 2014 9:36 am
- Forum: S8 Technical
- Topic: No Start !!
- Replies: 3
- Views: 8875
Re: No Start !!
Last time I started the car about a month or so ago the engine was running perfectly, then I came to start again and no start. The ecu was without power in this time as gearbox was out and main switched off. Check plugs and no spark at all, rechecked wiring and crank and cam signals before ecu and t...
- Tue Feb 18, 2014 5:54 pm
- Forum: S8 Technical
- Topic: No Start !!
- Replies: 3
- Views: 8875
No Start !!
Hello guys. Today I went to start up the drag car and the starter tured normally but without a hint of engine trying to start up. Engine sat for about two months without starting as i had gearbox out so I couldnt start it up. So as usual I pluged up laptop and in Scal syncstate was showing 360, and ...
- Sun Nov 24, 2013 2:09 pm
- Forum: S8 Technical
- Topic: Boost control help
- Replies: 5
- Views: 13006
Re: Boost control help
Pavlo, can you explain more what you mean by PD inversed and feeds inversed please as you got me confused...