Syvecs Forums

Not a tailor made but it looks okay? It is a SB560.

TimH wrote: ↑Mon May 11, 2020 4:51 pm Can't 100% read your notes.

I couldn't read as well =) AFAIK shootky anode to ECU FUEL6-8 output and cathode to 12V.
I think I found the diode bulk here. I hope so

I found my notes. Is that right?

Shottky diode should pull up the voltage 0.3v. Interesting. I'm %100 sure it was working when I swap the spec c engine. DCCD was also working! Now I check the DCCD and it is not working as well :/ Both DCCD and AVCS is not working now. If it is not an ecu hardware related issue I have to find where ...

Thanks Tim. When the engine is off and ignition is ON I don't see any voltages. Now I tried the output testing mode, fuel output base states and I have measured 7.99 V between two pins :? Sure it is not enough to trigger avcs solenoid. That makes me to think that I have used a wrong shotky diode may...

https://www.youtube.com/watch?v=kuDQ_MINuTk I'm a bit confused with my AVCS. I think they are not working! Long story short! I put the avcs solenoid connector off while engine running and connected with Scal. I measured the voltage on the connector it was milivolt levels. I measured the duty cycle a...

Yes you can do it by adding it into starting programs.
You create a script by mouse, keyboard or command script. Its like recording a macro. Autoit converts it into *.exe file. Mine is pinned into start not startup.

There is program called Autoit. I use it to get logged datas, to start a stream etc.. It works quite well for me.

My solution is an embedded carpc for long time logging.

https://youtu.be/K1Kd22XdbKw

RICE RACING wrote: ↑Tue Sep 24, 2019 8:01 pm

http://www.riceracing.com.au/rides/LotusElise_Pete.htm

This is cool car!