Syvecs Forums

The dealer remoted in via teamvier and made some changes and checked a few things, he took a copy of my current flash to try to do some more research and diagnostics. Hoping to hear back from Ryan with something positive that will lead me in the right direction too. I’m hoping I can figure this out ...

It is a brand new unit. Is there a way to verify the Can bridge is correct through the software settings?

Yes, the car coding is per the manual, even though it doesn’t make sense as to how the software labels it for 01 and 02. Did not try reversing them. Still getting the trans limp mode message on dash, even with KOEO. Also still have the same “Engine torque limit” error message on Syvecs. Based on thi...

I have entered the correct data with the assistance of teamviewer and LMS. Unfortunately the car has the same issue. :( I contacted the tuner that I was going to have tune the car, they have stated they will not tune the car do to me building it and also not buying the Syvecs from them. Believe it o...

I was afraid to mess anything up, especially it says car code 1 is transmission type in the software, but in the manual it says car code 1 is car model. It just doesn’t correlate to me.

They should at least label that better, kind of ridiculous really.

When I select car coding it gives the “car codes” 1-6 like below. When I open any one of them it doesn’t give an option to select any of the numbers like was stated in the manual. When I open any one the car code selections for example, it shows a vertical scale from 0 to about 70,000. This just doe...

The tuner will only tune when car is ready to be tuned. They want the bugs worked out before they touch it. So I have no help until then. Really sucks. The tuner tunes the fastest 911’s in the world. I want them to tune my car. I wish I had more time to figure this out. I am a nurse and also own a v...

Yes, I guess I’m not understanding what you’re saying?

I need to figure out the pinouts on the s7+ 996tt pnp to many ch them against the oem wiring connectors. If what you guys see is correct in the torque limit code that I’m getting is due to the transmission, maybe one of the Kanhai or Kanlow wires are different for some reason? I double checked all t...

On my stock wiring set up, there are two wires can height and can low that come from the TCM to the PCM, and then two wires that come from the PCM to the cluster. Based on the civics manual? I’m not sure which ones these are because it doesn’t seem to specify. The wiring diagram listed for my car be...