Syvecs Forums

Can the H Bridge thingy be bought separately ? What sort of current can they handle ?

What sort of input does it take ? 0-100% PWM ?

I'd like to control either my main pump, or additional pumps via PWM, just never been able to find a suitable controller

Aquamist offer a " Fast Acting Valve" and some nice nozzles with built in check valves that you can easily install in the intake, or wherever you like Although if using the FAV controlled via the ecu, no real need for the check valves So the ecu just turns the pump on initially, then water...

Making an engine loom is not something that should be attempted by idiots. For everyone else, there's Ryan's manual on how to hook up most of it. i do have a hnd in electronics and am qualified to solder on polaris missiles, however it is my first engine loom and i'm pretty sure i am an idiot, what...

Mine used to do that....no idea what happened to change it though.

Dont jack open the throttle until ALS is active then ? Dont the two happen together ?

The Jaycar kit above should do what you want.

As far as I can tell it can take an AC VR signal as an input and output a square wave signal. And you can adjust up/down by 0-100%

Although I just used it to adjust a square wave signal myself.

Does it actually get it from the speedo, or the same signal wire that feeds the speedo ? Or is the speedo mechanical ? Jaycar do a little box that allows you to adjust any speed pulse signal up/down 100% if you had to add a hall sensor somewhere to get a speed pulse. http://www.jaycar.co.uk/productV...

some suggestions here

http://dtaforum.psycode.com/viewtopic.p ... d&start=30

Pricewise how would he compare to local ??

Obviously exhcange rates etc arent so hot right now, and would be handy to have a list of local loom makers.

Anyone fancy creating a list of reccomended loom makers here ?