Search found 56 matches

by Hugh
Thu Nov 23, 2017 10:41 am
Forum: S6-I / S6Plus Technical
Topic: Torque Estimation
Replies: 4
Views: 12923

Re: Torque Estimation

Thanks Stevie, Did watch the video some time ago, will try watching it again. The MBT Torque estimate is a table, it appears to want you to populate it, so is not clear to me how this would show any changes in engine torque output, but does have a name that suggests this is what it is used for. None...
by Hugh
Thu Nov 23, 2017 9:48 am
Forum: S6-I / S6Plus Technical
Topic: Torque Estimation
Replies: 4
Views: 12923

Torque Estimation

I am using an S6Plus on an R35 GTR My car has just been for a service where it was also run on a Dyno, I was surprised to see there is a big dip in the torque curve at 5000 RPM. I have Torque Estimation Enabled and Fuel flow is set to the correct number for my injectors. I wanted to create an output...
by Hugh
Wed Nov 15, 2017 1:48 pm
Forum: General Syvecs Chat
Topic: Launch Control strategy
Replies: 6
Views: 13605

Re: Launch Control strategy

Not quite got an F1 budget to play with Stevie. Thought it might be better to break the launch down into three parts: 1----------Required RPM to get you off the line. 2----------RPM required to keep the engine on boost. 3----------S-Curve to blend the maximum engine RPM down to the correct wheel spe...
by Hugh
Fri Nov 10, 2017 11:17 am
Forum: General Syvecs Chat
Topic: Launch Control strategy
Replies: 6
Views: 13605

Launch Control strategy

Have been pondering how to get the best from the Syvecs launch control on my S6Plus and started looking for pointers to see how others had optimised their launches. Watching Formula 1 cars do practise starts on TV, I noticed that the wheels did not spin at all, all the work was being done by the clu...
by Hugh
Fri Nov 10, 2017 9:49 am
Forum: S6 GP/PnP Technical
Topic: S6 canbus dataset
Replies: 6
Views: 11416

Re: S6 canbus dataset

In case you haven't seen how each datastream works. With datastream set to custom CAN Go to :- Datastreams > Custom CAN > Transmit content. You can click on each data stream in the box at the bottom of the screen, at the top left of the screen you will see the slot number, the frame number and the c...
by Hugh
Sat Aug 19, 2017 9:33 am
Forum: General Syvecs Chat
Topic: S6Plus Ethernet not connecting on new laptop
Replies: 15
Views: 27661

Re: S6Plus Ethernet not connecting on new laptop

Ryan advised that the USB adapters that have Realtek chipsets are the ones to go for. When the Dell USB C did not work, I purchased a TP-Link UE300 USB 3.0 adapter, this also did not work, both of these have Realtek chipsets. Finally got Dell to install a new set of drivers from the Realtek site and...
by Hugh
Sun Jun 25, 2017 8:04 pm
Forum: General Syvecs Chat
Topic: S6Plus Ethernet not connecting on new laptop
Replies: 15
Views: 27661

S6Plus Ethernet not connecting on new laptop

Bought myself a slick new top of the line Dell laptop, did not realise it came without an Ethernet port. I bought a USB C Ethernet adaptor (USB 3.0) which works fine when connecting to a local network, it does not however connect to my Syvecs ECU. My old laptop connects fine to my Syvecs Ethernet ca...
by Hugh
Tue May 02, 2017 9:45 pm
Forum: General Syvecs Chat
Topic: Connecting Vbox video data logger, CAN settings
Replies: 13
Views: 24615

Re: Connecting Vbox video data logger, CAN settings

Searching for Liferacing and Datastream, I came across Configuring the CAN datastream on the F88 http://www.liferacing.com/uploads/files/F88CanDatastream.pdf This document describes working with an AIM dash and might help some. http://www.aim-sportline.com/download/ecu/racing/Life_F88CAN_102_eng.pdf...
by Hugh
Thu Dec 15, 2016 9:43 pm
Forum: S6 GP/PnP Technical
Topic: Injection End Angle
Replies: 27
Views: 68679

Re: Injection End Angle

RICE RACER, Many thanks for the excellent response again. Following on from Ryans clear statement on how injection end angle works, the links I provided show that Ryans comment "Its set this way in nearly all Engine management system" suggets that one can reference the way that other compa...
by Hugh
Thu Dec 15, 2016 8:17 pm
Forum: S6 GP/PnP Technical
Topic: Injection End Angle
Replies: 27
Views: 68679

Re: Injection End Angle

Ryan, Been continuing to read up on this subject. Looking at the following two links, it appears that other ECU manufacturers consider Injector end opening angle to be degrees before TDC on the compression stroke. Whereas Syvecs declare on the injector end angle to be degrees after TDC on the compre...