Syvecs Forums

Curious as to why it's vague ? Is it someone else looking at it and you are relaying info ? Again. You said you updated something....exactly what did you mean by this ? What process did you go through, what did you update from and to ? If you updated firmware, and did not update/import the old map t...

Display ECP etc ?

Screenshots of part of a map tell anyone very little. If you have the map saved from the ecu, then you can simply import this and upload it again with the new firmware installed. Again, instructions should cover this. or you can just flash the firmware you had been using and re-load your map as it h...

More info needed. What do you mean by you updated your ecu and now it's wiped ? If you mean you updated the firmware, then yes you need to save your old map and then import it to work with the new firmware. The instructions will cover this. Manual here http://www.syvecs.com/downloads/Syvecs%20Manual...

When you change the breakpoints, you can select to tag any map settings that may be affected so you can review and adjust if necessary.

There are many streams that can be sent over CAN...although not specifically a universal knock or no knock. There is knock retard per cylinder etc etc but it will depend what dash display you have as to what it gives the driver as a visual with regards knock warnings And yes Ryan I'd forgot about th...

Recorded fuel trims over time as a fuel correction map to match/overlay on the main fuel table is a very good feature that many aftermarket ecu's offer these days. Strangely Syvecs do not. I did ask about it years ago myself. Using logging and fuel closed loop adjustment multiplier is the closest to...

In the situation where you are switching from 550cc secondary injectors to 1000cc secondary injectors, what changes need to be made in the calibration other than Secondary Injector Opening Time to compensate for the larger injectors? Been looking through the calibration trying to find out if there'...

In the situation where you are switching from 550cc secondary injectors to 1000cc secondary injectors, what changes need to be made in the calibration other than Secondary Injector Opening Time to compensate for the larger injectors? Been looking through the calibration trying to find out if there'...

S6 Plus is pretty much an S6 plus an expander inside.

The Slave I/O's would refer to those on the expander

Up to 8 Slave outputs, and 6 slave inputs

http://www.syvecs.com/downloads/S6Plus% ... 20Info.pdf